ISO 9001:2015 Certified Manufacturer · Since 1996 Factory-direct export · Hebei, China
ISO 9001:2015 Manufacturer · Since 1996

Oil Seals & Gearbox End Caps, Direct from the Factory

Source Type TC and TG4 rotary shaft seals and Type EC end caps in Black NBR or Brown FKM from 7,718 ready production molds — no tooling fee, export-packed, and quoted directly by our export team.

  • No tooling fee on 7,466 TC/TG4 and 252 EC catalog sizes
  • Dimensions aligned with ISO 6194-1 and DIN 3760
  • Fast dispatch on stocked sizes; lead time confirmed in every quotation
  • Speak directly with the manufacturer — no trading-company markup

Find Your Size in Seconds

Search 7,718 ready molds — or paste a size like 35x52x7.

No tooling fee
Loading catalog… Full size table
Can’t find your size? We quote custom dimensions too. Send a drawing
Since 199630 years in rubber sealing
ISO 9001:2015Certified QMS, valid to 2028
23,300 m²Manufacturing base, Hebei
7,718 moldsReady catalog tooling
13 patentsAutomated molding & trimming
EU RoHSSample-tested compounds

Three Focused Product Lines for Rotary & Gearbox Sealing

We specialise in a narrow range and make it well. Drag any cutaway to inspect the lip, spring, steel case and outer diameter.

7,466 sizes · OD 9–1,380 mm
Primary lip Dust lip Garter spring Steel case
DIN 3760 Type AS equivalent

Type TC Double-Lip Oil Seals

The industry-standard rotary shaft seal: smooth rubber OD, spring-loaded primary lip and auxiliary dust lip. Ideal for motors, pumps and general gearboxes.

  • Lip designDouble lip + garter spring
  • Outer diameterSmooth rubber-covered
  • Size range2×9×4 to 1320×1380×30 mm
  • CompoundsNBR 70A · FKM 75A
Triple lip · Corrugated OD
Corrugated OD Primary lip Dual dust lips Garter spring
For dusty & aluminum housings

Type TG4 Triple-Lip Oil Seals

Corrugated outer diameter plus a three-lip profile for heavy dust and slurry exclusion and secure static sealing in aluminum or thermally cycling bores.

  • Lip designTriple lip + garter spring
  • Outer diameterCorrugated (wave-ribbed)
  • Typical useReducers, agricultural & dusty drives
  • CompoundsNBR 70A · FKM 75A
252 SKUs · OD 20–240 mm
Smooth / corrugated OD Steel cup
DIN 3760 Type VK closure

Type EC Gearbox End Caps

Rubber-encapsulated steel closure caps that seal blind bearing bores on gearboxes and transmissions — matched to our shaft seals by bore diameter.

  • OD optionsSmooth & corrugated
  • CoreStamped steel cup
  • Size rangeEC 20×4 to EC 240×15 mm
  • CompoundsNBR 70A · FKM 75A

Built for Gearbox, Motor and Machinery Applications

Whether you build equipment, maintain it, or stock seals for resale, our catalog covers the sizes you buy most.

Gearboxes & Speed Reducers

Input/output shaft seals and blind-bore end caps for helical, bevel and worm reducers.

Electric Motors & Drives

TC seals in NBR for standard motors; FKM for high-speed or high-temperature duty.

Pumps & Hydraulic Equipment

NBR compounds compatible with mineral lubricating oils, hydraulic fluids and greases.

Agricultural & Heavy Machinery

TG4 triple-lip design for dust, mud and slurry exclusion in harsh field conditions.

Seal Distributors & MRO

Broad coverage from 9 mm to 1,380 mm OD for stock replenishment and maintenance demand.

OEM Projects

Catalog sizes with zero tooling cost; non-standard dimensions quoted from your drawing.

Why Purchasing Teams Choose DTO

Clear specifications, ready tooling and one accountable manufacturer — so you spend less time qualifying and chasing suppliers.

No Tooling Cost on Catalog Sizes

7,466 TC/TG4 and 252 EC molds are already in production. You pay for seals — not for new molds or setup.

7,718 ready molds

Two Proven Compounds, Clear Specs

Every seal is molded in Black NBR (70±5 Shore A, −40 to +120°C) or Brown FKM (75±5 Shore A, −20 to +200°C). No guesswork on material.

NBR 70A · FKM 75A

One Supplier for the Whole Gearbox

Pair EC end caps with same-bore TC or TG4 shaft seals and consolidate your sealing BOM into one order and one shipment.

Same-bore pairing

Stock + Scheduled Production

Stocked sizes ship quickly from our automated warehouse. For other sizes, the production lead time is confirmed in writing in your quotation.

Lead time in every quote

Process Control You Can Audit

ISO 9001:2015 certified quality management, automated vulcanizing lines and 13 utility-model patents on molding, trimming and case preparation.

ISO 9001:2015 · to 2028

Export-Ready Packing

Sealed poly-bags or protective rolls in reinforced export cartons, with standard counts per size — easy to receive, store and re-sell.

Bag & roll packing
DTO TC and TG4 rotary shaft oil seals stacked by size
Production samples · TC & TG4 rotary shaft seals

What Goes Into Every DTO Shaft Seal

Five engineered elements, controlled batch by batch, determine sealing life on your shaft.

  1. 1
    Primary sealing lipSpring-loaded sealing edge with 0.40 mm nominal radial interference on 30–60 mm shafts.
  2. 2
    Dust lip(s)One auxiliary dust lip on Type TC; two on Type TG4 for a triple-lip barrier.
  3. 3
    Garter springHelical tension spring that keeps radial contact load consistent across thermal cycles.
  4. 4
    Stamped steel casePhosphated, chemically bonded carbon-steel insert for rigidity and press-fit retention.
  5. 5
    Rubber outer diameterSmooth OD (TC) for standard bores, or corrugated OD (TG4 & EC) for enhanced static sealing.

Compound Specifications at a Glance

Choose the compound by medium and temperature. Need help? Send us your operating conditions and we will recommend one.

Compound Classification Hardness Temperature range Typical media & duty
Black NBR (Nitrile) ASTM D1418 / ISO 1629 NBR 70 ± 5 Shore A −40°C to +120°C Mineral lubricating oils, hydraulic fluids, greases; standard reducers, motors and pumps
Brown FKM (Fluoroelastomer) ASTM D1418 / ISO 1629 FKM (FPM) 75 ± 5 Shore A −20°C to +200°C Synthetic PAG/PAO gear oils, EP additives; continuous high-temperature transmissions

Shaft & bore tolerance guide

See Our 23,300 m² Factory in Action

Real footage from our production floor in Hebei, China — automated vulcanizing, FKM post-curing, smart warehousing and export packing.

▶
Automated Molding Patented vulcanizing presses for consistent lip concentricity.
▶
FKM Post-Curing Two-stage oven curing for high-temperature FKM seals.
▶
Smart Warehouse Fast dispatch on stocked TC, TG4 and EC sizes.
▶
Export Packing Bagged and roll-wrapped shipments in export cartons.
ISO 9001:2015Certified QMS (valid to 2028)
13 PatentsAutomated molding & trimming
EU RoHSSample-tested compounds
PTC ASIA 2026Shanghai exhibitor (Nov 3–6)

From Inquiry to Shipment in 5 Clear Steps

A simple, transparent process — you always know the price, the lead time and who is handling your order.

Send your requirement

Sizes, a BOM list, a drawing or a photo of the old seal — by form, email or WhatsApp.

Receive a formal quote

Unit price, stock status and confirmed production lead time for every line item.

Confirm the order

Approve compound, quantities and shipping terms (EXW, FOB or express).

Production & inspection

Molded and inspected under ISO 9001:2015 process control.

Packing & dispatch

Bagged or roll-packed in export cartons and handed to your forwarder or courier.

Questions Buyers Ask Before Ordering

Straight answers for engineers, maintenance teams and seal distributors.

Do you charge mold or tooling fees on catalog sizes?
No. All 7,466 TC/TG4 shaft seal molds (OD 9–1,380 mm) and 252 EC end cap SKUs (OD 20–240 mm) are ready tooling, in Black NBR 70A or Brown FKM 75A. Tooling is only quoted for non-standard dimensions.
What is the difference between Type TC and Type TG4 seals?
Type TC has a smooth rubber OD and a double-lip profile (spring-loaded primary lip + dust lip). Type TG4 has a corrugated OD and a triple-lip profile for heavy dust/slurry exclusion and better static sealing in aluminum or thermally cycling housings.
Which compound should we choose — NBR or FKM?
Choose Black NBR 70A (−40°C to +120°C) for mineral oils, hydraulic fluids and greases. Choose Brown FKM 75A (−20°C to +200°C) for synthetic PAG/PAO gear oils, EP additives, high shaft speeds and continuous high-temperature duty. Not sure? Send your operating conditions and we will recommend one.
How are MOQ, lead time and packing handled?
Catalog sizes are supplied in full factory sealed poly-bags or protective rolls (10–50 pcs per pack depending on OD and compound) for wholesale and OEM orders — we do not sell single retail pieces. Stocked sizes ship quickly from our automated warehouse; production lead time and custom-mold MOQ for non-standard dimensions are confirmed in your quotation.
Can we order end caps and matching shaft seals together?
Yes. Every row in our EC End Cap catalog links to TC and TG4 shaft seals with the same bore diameter, so you can consolidate your gearbox sealing BOM into one shipment.
Can you quote from a drawing or an old seal?
Yes. Upload a PDF/CAD drawing on our quote page, or send the dimensions and a photo of the old seal by email or WhatsApp. If it matches a catalog mold there is no tooling fee.

Talk to Our Export Team

Send your sizes, quantities or drawing. You will deal directly with the manufacturer from first quote to shipment.

Jasper LiExport Director · English & Chinese
Chat on WhatsApp TC Catalog EC Catalog

Get a Quick Quote

Tell us what you need — sizes, quantities, compound. Items in your quote list are attached automatically.

Your details are used only to prepare your quotation. See our privacy policy.