ISO 9001:2015 Certified Manufacturer · Since 1996 Factory-direct export · Hebei, China
Technical reference · TC · TG4 · EC

Oil Seal Engineering Guide: Compounds, Tolerances & Installation

Compound data for Black NBR and Brown FKM, lip interference values, and recommended shaft and housing bore machining for Type TC, TG4 and EC seals.

Two Standardized Compounds Across TC, TG4 & EC

DTO standardizes exclusively on verified Black NBR and Brown FKM formulations to ensure consistent batch cure curves, shore hardness, and thermal stability.

Compound & Color Standard Classification Hardness Operating Temp Range Compatible Media & Typical Equipment
Black NBR (Nitrile) ASTM D1418 / ISO 1629 NBR 70 ± 5 Shore A -40°C to +120°C Mineral oils, hydraulic oils, lubricating greases, water; standard motors, pumps & gear reducers
Brown FKM (Fluoroelastomer) ASTM D1418 / ISO 1629 FKM (FPM) 75 ± 5 Shore A -20°C to +200°C Synthetic gear oils (PAG / PAO), extreme-pressure additives, fuels; continuous high-temp gearboxes & drives

Shaft & Housing Bore Machining Guidelines

Reference installation parameters aligned with ISO 6194-1 and DIN 3760 rotary seal standards:

  • Housing Bore ToleranceISO H8
  • Housing Bore RoughnessRa 1.6 – 6.3 μm (Rubber-Covered OD)
  • Shaft Diameter ToleranceISO h11
  • Shaft Surface Hardness≥ 55 HRC Recommended
  • Shaft Plunge-Ground FinishRa 0.2 – 0.8 μm (Lead-Free)
  • Installation Lead-In Chamfer15° – 30° Deburred Chamfer

Lip Interference & Structural Comparison

Controlled internal molding dimensions across our three core product series:

  • 30 – 60 mm Shaft Primary Lip Interference0.40 mm Nominal (0.20–0.50 mm Range)
  • Example (TC 32×47×7 mm)Molded Lip ID 31.6 mm (31.5–31.8 mm)
  • Type TC ArchitectureSmooth OD · Double Lip (2 Lips) + Spring
  • Type TG4 ArchitectureCorrugated OD · Triple Lip (3 Lips) + Spring
  • Type EC ArchitectureSmooth or Corrugated OD · Stamped SPCC Steel Cup
TC Catalog (PDF) EC Catalog (PDF)